How to use Green Flash

Manicure:

Step 1: Clean your nails very well with Green Flash Remover.

Step 2: base. Apply Green Flash Base and cure it under the lamp for 1 minute.

Step 3: color. Apply your favorite color and place the nail under the lamp for 1 minute. Repeat to have 2 thin coats of color.

Step 4: finishing. Apply Top Coat Green Flash and place the nail under the lamp for 2 minutes.

It does not work to mix Green flash products with other gel or non-gel products.

Remove manicure:

It is very simple. Soak a cotton pad with nail polish remover and place it on the nail for 2 minutes. Then gently clean the nail until the polish is removed.

You can use any non-acetone nail polish remover (not necessarily theirs).

Doubts:

- Can I mix two Green Flash and Green?

No, each formula is unique and is made up of different ingredients.

- Can I use Green Flash without the LED lamp?

No, Green Flash polish always requires a lamp.

- Can I use another lamp?

Yes, Manucurist recommends that you use an LED lamp with a power of at least 18W. Be sure to adjust the time if your lamp is of higher power.

- Can I use Green Flash if I am pregnant?

Manucurist recommends not using any type of polish (neither conventional nor natural). Manicurist polishes do not contain endocrine disruptors, monomers or hydroquinone.